This kit contains all parts necessary to allow the fitment of our Pro 150 Solenoids to the back of your Bow 2 Winch Motor.
Solid insulated copper bars designed to link your motor to your solenoid to ensure you have full electrical power available at your winch motor. If you’re looking to really ramp up the capability of your winch, look no further.
These Pro 150 XL PowerBars provide almost double the surface area of our standard Pro 100 PowerBars meaning that much more power can be sent to the motor more efficiently.
Available for Single or TwinMotor applications - Please select whether you require a kit for a SingleMotor or a TwinMotor, in the 'Options' tab above.
This item is the Bow Motor 2 Plus Kit Only.
If you already own our Pro 100 PowerBar kit (that comes fitted as standard to a Gigglepin Winch), and wish to upgrade, you will also have to purchase a set of our Standard MotorBolts, as the Extended MotorBolts will no longer fit with these PowerBars.
Please note, this kit does not include the Gigglepin Pro 150 Albright Solenoid, to purchase this please click here.
The Single Motor kit comes supplied with 2 x Long Bars, 1 x Short Bar, x1 Pro 150 Solenoid bracket, 6 x Black Rubber Terminal Boots, 2 x 1/4 Steel Zinc Washers, 2 x M5x10mm Bolts, and 2 x M5 washers.
The Twin Motor kit comes supplied with 4 x Long Bars, 2 x Short Bars, 2 x Angled Bars (to connect the two power terminals together and the two earth terminals together), x2 Pro 150 Solenoid brackets, 14 x Black Rubber Terminal Boots, 4 x1/4 Steel Zinc Washers, 4 x M5x10mm Bolts, 4 x M5 washers, 2 x M10x25mm Bolts, 4 x M10 Washers and 2 x M10 Nylock nuts.