Gigglepin Winches
View
£3,840.00 inc. VAT £3,200.00
This electric winch has been tested vigorously, the GP100 won its first competitive outing and has been dominating the off-road world (worldwide) ever-since, winning such events as the Croatia Trophy, Breslau Rallye, Graf Trophy, Portugal Extrem, Thailand Extreme, the Ultra4 European Championship, to name a few. With off-load line speeds from 80ft up to 600ft per minute, there is a GP100 for everyone!
Gigglepin Winches are proud to announce their NEW 2-SPEED family!
2-SPEED Winches, 2-SPEED Top Housings and 2-SPEED Gear Sets.
The Gigglepin 2-SPEED Gear family offer unrivalled versatility, letting you seamlessly change between low and high gears at the flick of a switch. This innovation marks a first for Gigglepin, combining our renowned reliability and build quality with 2-speed functionality in one unit. Designed for those who demand precision and speed, this cutting-edge 2-SPEED is perfect for any challenge.
With over three years of testing in the field and on test rigs, these 2-SPEED units have already proven themselves by winning events in Europe and withstanding imposed loads of over 13 tons during tests.
The NEW 2-SPEED gives you Power, Speed and Control.
Power: Use low gear to give you unrivalled strength and Power
Speed: Switch to high gear and unleash the Speed for fast recoveries and line retrieval.
Control: Two ratios allow you to have Control over all your recovery situations allowing you to be safer and more efficient
What is the NEW 2-SPEED family?
The NEW 2-SPEED family is available as three different options. You can choose from:
- 2-SPEED Winches - Factory built GP100, GP50 and GP25 Winches with the NEW 2-SPEED gears installed and ready for action
- 2-SPEED Gear Sets - these gear sets can be retro fitted to upgrade your existing GP100, GP50 and GP25; or any winch fitted with a Gigglepin top housing manufactured after 2017
- 2-SPEED Top Housings - these are available in Twin-Motor and Single-Motor configurations to fit all existing models and older Gigglepin GP80, Warn 8274 and 8074 winches
What makes the NEW 2-SPEED so good?
The NEW 2-SPEED family from Gigglepin Winches raises the bar for performance winching and has the following key features:
- Multiple gear choices in low and high ratios
- Timed gearing for silky smooth operation
- Easy to fit to existing winches
- Heat treated gears and engagement dogs for unparalleled strength
- Air activation that defaults to the low ratio if air is lost
- Externally mounted air system means no possibility of air leaks inside the winch
- Stainless steel external hardware for corrosion resistance
- 7 engagement dogs for maximum strength
- Neutral gear positioning allowing gear changes while at speed
- Proven to handle over 13 tons of loading during testing
- Gigglepin reliability and build quality with worldwide support
What ratios are available?
Low ratio options:
+ 00% (133.28:1)
+ 15% (115.41:1)
+ 25% (100.94:1)
+ 40% (83.75:1)
High Ratio options:
+ 25% (100.94:1)
+ 40% (83.75:1)
+ 50% (66.56:1)
+ 60% (53.68:1)
Need even more speed? Pair with Hellfire or Hurricane Gears! Note: Hell–Fire gear ratios have been updated to work with the NEW 2-SPEED Gears.
What will the NEW 2-SPEED Gears and Top Housings fit?
The New 2-SPEED Gear Kits have been designed to fit into all Gigglepin GP100, GP50 and GP25 Twin Motor and Single Motor Top Housings manufactured since 2017.
To install the new 2-SPEED gears into existing winches you will need to strip the existing top housing and using the drill jigs and drill bits supplied, drill a new hole in the rear bearing pocket. On each kit there is a QR code that will take the user to videos on You-Tube showing in detail how to install these gear sets.
Hard copy instructions will be available for download on our website in the “Tech data” section.
Note: The New 2-SPEED gear sets will not fit earlier GP80 style housings.
The New 2-SPEED Top Housings are a great upgrade for all current Gigglepin GP100, GP50 and GP25 winches. They also fit all GP80 Winches or WARN 8274/8074 Winches.
These Top Housings are a simple upgrade for your winch. Using high quality gears and roller bearings throughout they are a superb upgrade.
Supplied with new mounting bolts for Warn 8274 and Gigglepin winches, no modifications are required making it simple and fast to install.
Power, Speed and Control for your winch.
What else do I need to operate 2-SPEED systems? Air pressure, activation kits etc.
The New 2-SPEED family require a regulated air feed to make them operate. You will need an air supply with a minimum air pressure of 80psi and a maximum pressure of 150psi to operate the system. We recommend using ARB mini, high-output and twin motor compressors.
When ordering you can choose between an electric air activation kit or a manual air switch activation kit.
£3,348.00 inc. VAT £2,790.00
The GP50 SingleMotor winch has been developed using the proven GP100 Gearbox and Drum platform. We then fitted our SingleMotor TopHousing to create the ultimate SingleMotor winch. This electric winch has a lower profile then it's big brother and the motor can be rotated by 90 degrees to allow it to be fitted into tight locations.
Available with two motor options, six different ratios and three different drum options.
Full Description at the bottom of the page.
Gigglepin Winches are proud to announce their NEW 2-SPEED family!
2-SPEED Winches, 2-SPEED Top Housings and 2-SPEED Gear Sets.
The Gigglepin 2-SPEED Gear family offer unrivalled versatility, letting you seamlessly change between low and high gears at the flick of a switch. This innovation marks a first for Gigglepin, combining our renowned reliability and build quality with 2-speed functionality in one unit. Designed for those who demand precision and speed, this cutting-edge 2-SPEED is perfect for any challenge.
With over three years of testing in the field and on test rigs, these 2-SPEED units have already proven themselves by winning events in Europe and withstanding imposed loads of over 13 tons during tests.
The NEW 2-SPEED gives you Power, Speed and Control.
Power: Use low gear to give you unrivalled strength and Power
Speed: Switch to high gear and unleash the Speed for fast recoveries and line retrieval.
Control: Two ratios allow you to have Control over all your recovery situations allowing you to be safer and more efficient
What is the NEW 2-SPEED family?
The NEW 2-SPEED family is available as three different options. You can choose from:
- 2-SPEED Winches - Factory built GP100, GP50 and GP25 Winches with the NEW 2-SPEED gears installed and ready for action
- 2-SPEED Gear Sets - these gear sets can be retro fitted to upgrade your existing GP100, GP50 and GP25; or any winch fitted with a Gigglepin top housing manufactured after 2017
- 2-SPEED Top Housings - these are available in Twin-Motor and Single-Motor configurations to fit all existing models and older Gigglepin GP80, Warn 8274 and 8074 winches
What makes the NEW 2-SPEED so good?
The NEW 2-SPEED family from Gigglepin Winches raises the bar for performance winching and has the following key features:
- Multiple gear choices in low and high ratios
- Timed gearing for silky smooth operation
- Easy to fit to existing winches
- Heat treated gears and engagement dogs for unparalleled strength
- Air activation that defaults to the low ratio if air is lost
- Externally mounted air system means no possibility of air leaks inside the winch
- Stainless steel external hardware for corrosion resistance
- 7 engagement dogs for maximum strength
- Neutral gear positioning allowing gear changes while at speed
- Proven to handle over 13 tons of loading during testing
- Gigglepin reliability and build quality with worldwide support
What ratios are available?
Low ratio options:
+ 00% (133.28:1)
+ 15% (115.41:1)
+ 25% (100.94:1)
+ 40% (83.75:1)
High Ratio options:
+ 25% (100.94:1)
+ 40% (83.75:1)
+ 50% (66.56:1)
+ 60% (53.68:1)
Need even more speed? Pair with Hellfire or Hurricane Gears! Note: Hell–Fire gear ratios have been updated to work with the NEW 2-SPEED Gears.
What will the NEW 2-SPEED Gears and Top Housings fit?
The New 2-SPEED Gear Kits have been designed to fit into all Gigglepin GP100, GP50 and GP25 Twin Motor and Single Motor Top Housings manufactured since 2017.
To install the new 2-SPEED gears into existing winches you will need to strip the existing top housing and using the drill jigs and drill bits supplied, drill a new hole in the rear bearing pocket. On each kit there is a QR code that will take the user to videos on You-Tube showing in detail how to install these gear sets.
Hard copy instructions will be available for download on our website in the “Tech data” section.
Note: The New 2-SPEED gear sets will not fit earlier GP80 style housings.
The New 2-SPEED Top Housings are a great upgrade for all current Gigglepin GP100, GP50 and GP25 winches. They also fit all GP80 Winches or WARN 8274/8074 Winches.
These Top Housings are a simple upgrade for your winch. Using high quality gears and roller bearings throughout they are a superb upgrade.
Supplied with new mounting bolts for Warn 8274 and Gigglepin winches, no modifications are required making it simple and fast to install.
Power, Speed and Control for your winch.
What else do I need to operate 2-SPEED systems? Air pressure, activation kits etc.
The New 2-SPEED family require a regulated air feed to make them operate. You will need an air supply with a minimum air pressure of 80psi and a maximum pressure of 150psi to operate the system. We recommend using ARB mini, high-output and twin motor compressors.
When ordering you can choose between an electric air activation kit or a manual air switch activation kit.
2-SPEED Gigglepin GP25 Ultimate Adventure Winch
0 review(s)
£3,150.00 inc. VAT £2,625.00
The GP25 SingleMotor Ultimate Adventure Winch, designed with more relaxed winching in mind!
The GP25 SingleMotor is built using Gigglepin's popular SuperHousing, SingleMotor TopHousing and our Solid Narrow Diameter Drum. Designed for those that don't require a FreeSpool, it is available with six different ratios and two different drum lengths. The motor can also be rotated by 90 degrees to allow it to be fitted into tight locations. Using the same High Performance gears as it's big brothers, it is in a class of it's own and is raising the standard for an electrical winch for Adventure Winching!
Cheaper than a Warn 8274, there is now a GP Winch for everyone!
The Gigglepin 2-SPEED Gear family offer unrivalled versatility, letting you seamlessly change between low and high gears at the flick of a switch. This innovation marks a first for Gigglepin, combining our renowned reliability and build quality with 2-speed functionality in one unit. Designed for those who demand precision and speed, this cutting-edge 2-SPEED is perfect for any challenge.
With over three years of testing in the field and on test rigs, these 2-SPEED units have already proven themselves by winning events in Europe and withstanding imposed loads of over 13 tons during tests.
The NEW 2-SPEED gives you Power, Speed and Control.
Power: Use low gear to give you unrivalled strength and Power
Speed: Switch to high gear and unleash the Speed for fast recoveries and line retrieval.
Control: Two ratios allow you to have Control over all your recovery situations allowing you to be safer and more efficient
What is the NEW 2-SPEED family?
The NEW 2-SPEED family is available as three different options. You can choose from:
- 2-SPEED Winches - Factory built GP100, GP50 and GP25 Winches with the NEW 2-SPEED gears installed and ready for action
- 2-SPEED Gear Sets - these gear sets can be retro fitted to upgrade your existing GP100, GP50 and GP25; or any winch fitted with a Gigglepin top housing manufactured after 2017
- 2-SPEED Top Housings - these are available in Twin-Motor and Single-Motor configurations to fit all existing models and older Gigglepin GP80, Warn 8274 and 8074 winches
What makes the NEW 2-SPEED so good?
The NEW 2-SPEED family from Gigglepin Winches raises the bar for performance winching and has the following key features:
- Multiple gear choices in low and high ratios
- Timed gearing for silky smooth operation
- Easy to fit to existing winches
- Heat treated gears and engagement dogs for unparalleled strength
- Air activation that defaults to the low ratio if air is lost
- Externally mounted air system means no possibility of air leaks inside the winch
- Stainless steel external hardware for corrosion resistance
- 7 engagement dogs for maximum strength
- Neutral gear positioning allowing gear changes while at speed
- Proven to handle over 13 tons of loading during testing
- Gigglepin reliability and build quality with worldwide support
What ratios are available?
Low ratio options:
+ 00% (133.28:1)
+ 15% (115.41:1)
+ 25% (100.94:1)
+ 40% (83.75:1)
High Ratio options:
+ 25% (100.94:1)
+ 40% (83.75:1)
+ 50% (66.56:1)
+ 60% (53.68:1)
Need even more speed? Pair with Hellfire or Hurricane Gears! Note: Hell–Fire gear ratios have been updated to work with the NEW 2-SPEED Gears.
What will the NEW 2-SPEED Gears and Top Housings fit?
The New 2-SPEED Gear Kits have been designed to fit into all Gigglepin GP100, GP50 and GP25 Twin Motor and Single Motor Top Housings manufactured since 2017.
To install the new 2-SPEED gears into existing winches you will need to strip the existing top housing and using the drill jigs and drill bits supplied, drill a new hole in the rear bearing pocket. On each kit there is a QR code that will take the user to videos on You-Tube showing in detail how to install these gear sets.
Hard copy instructions will be available for download on our website in the “Tech data” section.
Note: The New 2-SPEED gear sets will not fit earlier GP80 style housings.
The New 2-SPEED Top Housings are a great upgrade for all current Gigglepin GP100, GP50 and GP25 winches. They also fit all GP80 Winches or WARN 8274/8074 Winches.
These Top Housings are a simple upgrade for your winch. Using high quality gears and roller bearings throughout they are a superb upgrade.
Supplied with new mounting bolts for Warn 8274 and Gigglepin winches, no modifications are required making it simple and fast to install.
Power, Speed and Control for your winch.
What else do I need to operate 2-SPEED systems?
The New 2-SPEED family require a regulated air feed to make them operate. You will need an air supply with a minimum air pressure of 80psi and a maximum pressure of 150psi to operate the system. We recommend using ARB mini, high-output and twin motor compressors.
When ordering you can choose between an electric air activation kit or a manual air switch activation kit.